几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

spot face specifications
i am compiling best practices for bolted joint design. i would like people to share any drawing specifications they use for spot faced holes for bolted joints. i was thinking about flatness, perpendicularity and surface finish. thanks for your help.
cory
hope this helps.
cory, one thing to condider would be whether you put a slight chamfer/csk for the slight radius where the shank joins the head on the bolt/screw.
not sure i've ever seen any of the 3 things you explicitly list specifically stated for a spot face. that's not to say they souldn't be but i don't recall seeing it.
we have a chart for c'bores, spotfaces etc. based on the values in machineries for inch counterbores. we use same dia for c'bores and spot faces.

kenat,
also take in account any finish you may add.
chris
solidworks/pdmworks 08 3.1
autocad 08

2009-09-05, 01:02 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	spot face specifications spot face specifications i am compiling best practices for bolted joint design. i would like people to share any drawing specifications they use for spot faced holes for bolted joints. i was thinking about flatness, perpendicularity and surface finish. thanks for your help. cory hope this helps. cory, one thing to condider would be whether you put a slight chamfer/csk for the slight radius where the shank joins the head on the bolt/screw. not sure i've ever seen any of the 3 things you explicitly list specifically stated for a spot face. that's not to say they souldn't be but i don't recall seeing it. we have a chart for c'bores, spotfaces etc. based on the values in machineries for inch counterbores. we use same dia for c'bores and spot faces. kenat, also take in account any finish you may add. chris solidworks/pdmworks 08 3.1 autocad 08 __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]