几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - primary secondary and tertiary datum planes

primary secondary and tertiary datum planes
what are the rules to locate which features as the primary, secondary, and tertiary datum features?
eng-tips forums is member supported.
weisusu, take a look at asme y14.5m-1994 section 4 assuming that's what you work to.
perhaps the most important one that sprins to mind is that they should be selected based on function..
again it seems you need to do some reading and hopefully get some training.
kenat,
one of the things that i was taught in gd&t training was to think of the planes in the order you would mount the part in a fixture for inspection.

"wildfires are dangerous, hard to control, and economically catastrophic."
ben loosli
related to the original question, do the primary, secondary and tertiary datums have to follow a-b-c order?
no
you can place the part on c (primary) locate it to a (secondary) and position it to b (tertiary).

"wildfires are dangerous, hard to control, and economically catastrophic."
ben loosli
can someone cite a paragraph reference, i get beat-up about this all the time by our wonderful qa folks.
a quick google search:
mad,
see para. 4.3, at least that's where it was in the '82 std. from that para., "the desired order of precedence is indicated by entering the appropriate datum reference letters, from left to right, in the feature control frame".
i.e. the oop can vary from feature to feature.
pretty close trueblood. in y14.5-1994, paragraph 4.4 "specifying datum features in an order of precedence" covers it.
thanks folks, my argument is won for the day.

2009-09-05, 12:18 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	primary secondary and tertiary datum planes primary secondary and tertiary datum planes what are the rules to locate which features as the primary, secondary, and tertiary datum features? eng-tips forums is member supported. weisusu, take a look at asme y14.5m-1994 section 4 assuming that's what you work to. perhaps the most important one that sprins to mind is that they should be selected based on function.. again it seems you need to do some reading and hopefully get some training. kenat, one of the things that i was taught in gd&t training was to think of the planes in the order you would mount the part in a fixture for inspection. "wildfires are dangerous, hard to control, and economically catastrophic." ben loosli related to the original question, do the primary, secondary and tertiary datums have to follow a-b-c order? no you can place the part on c (primary) locate it to a (secondary) and position it to b (tertiary). "wildfires are dangerous, hard to control, and economically catastrophic." ben loosli can someone cite a paragraph reference, i get beat-up about this all the time by our wonderful qa folks. a quick google search: mad, see para. 4.3, at least that's where it was in the '82 std. from that para., "the desired order of precedence is indicated by entering the appropriate datum reference letters, from left to right, in the feature control frame". i.e. the oop can vary from feature to feature. pretty close trueblood. in y14.5-1994, paragraph 4.4 "specifying datum features in an order of precedence" covers it. thanks folks, my argument is won for the day. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]