huangyhg

dimension a screw
i am trying to call out a screw spec. on a drawing. it is a m4 x 0.7 screw. is there any other spec. to a screw other than the "m4 x 0.7" callout. what happened was the supplier sent us the screws as per the m4 x 0.7. but it failed our testing gages because they were a different "d" spec. i checked on various drafting standards. i could not find anymore information about a "d" spec. for screws. i would appreciate if anybody can give me soem information about this. thank you.
check out our whitepaper library.
yes,
i cannot speak for the rest of the world but in europe in the automotive trade it is normal to specify a din or iso number to cover things like material, tolerance and finish/ coating.
even if none of these matter, length is normal.
these might help.
you might also want to consider using a nas, ms, or an spec to control your mechanical hardware. although, the per piece price will increase some industries mandate that type of control.
best regards,
heckler
sr. mechanical engineer
sw2005 sp 4.0 & pro/e 2001
dell precision 370
p4 3.6 ghz, 1gb ram
xp pro sp2.0
nivida quadro fx 1400
o
_`\(,_
(_)/ (_)
"there is no trouble so great or grave that cannot be much diminished by a nice cup of tea" bernard-paul heroux

promoting, selling, recruiting and student posting
are not allowed in the forums.
(add stickiness to your site by linking to this professionally managed technical forum)
title: drafting standards,
description: drafting standards, gd&t & tolerance analysis technical support forum and mutual help system for engineering professionals. selling and recruiting forbidden.

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]