几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

controlling finish on drawings.
hi.
we are applying gd&t to our drawings to place controls on machining of our products so that the expectations from any subcontractor meet those unwritten expectations of our own shop and selected managed contractors.
this has been a learning curve and surprisingly the subcontractors have not questioned the change to gd&t on the drawings.
where we struggle at present is in how to apply control of the visual appearance on the drawings. the products are bright nickel plated or electro-polished stainless steel and visual appearance is significant. the attachment link (700kb jpg)shows some images of finishes, acceptable and unacceptable. the unacceptable finishes in the images in fact have a smaller ra roughness but it is the non-uniform pattern that is not acceptable. we don't wish to introduce additional cost of specifying grinding or polishing if it is unnecessary.
can anyone suggest a means of applying this information to a drawing, would it require reference to say this link or another means of specification such as a standard.
thanks,
steve
i believe there are letters to denote the "lay" of the machining lines on the surface. here's a really horrible link:
there is a difference between 'roughness' and 'finish'.
finish would be, for example, 'anodize'.
roughness would be the surface itself.
a lot of people/companies call it 'surface finish'.
handleman,
finish specification lay lines are described in the ever popular machinery's handbook.
jhg
thanks. i suppose then i am trying to control lay lines using standard symbols.
at what point would the circular lay lines of a face mill become perpendicular as there does not seem to be a symbol for this lay.
when i can accept 3 lay line styles, would i put all 3 in the finish symbol check mark (perpendicular, circular and longitudinal)
steve
add the roughness symbol/info to the drawing, let the machine shop do the rest. they will have to meet the spec.
chris
solidworks/pdmworks 08 3.1
autocad 08

2009-09-04, 05:33 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	controlling finish on drawings controlling finish on drawings. hi. we are applying gd&t to our drawings to place controls on machining of our products so that the expectations from any subcontractor meet those unwritten expectations of our own shop and selected managed contractors. this has been a learning curve and surprisingly the subcontractors have not questioned the change to gd&t on the drawings. where we struggle at present is in how to apply control of the visual appearance on the drawings. the products are bright nickel plated or electro-polished stainless steel and visual appearance is significant. the attachment link (700kb jpg)shows some images of finishes, acceptable and unacceptable. the unacceptable finishes in the images in fact have a smaller ra roughness but it is the non-uniform pattern that is not acceptable. we don't wish to introduce additional cost of specifying grinding or polishing if it is unnecessary. can anyone suggest a means of applying this information to a drawing, would it require reference to say this link or another means of specification such as a standard. thanks, steve i believe there are letters to denote the "lay" of the machining lines on the surface. here's a really horrible link: there is a difference between 'roughness' and 'finish'. finish would be, for example, 'anodize'. roughness would be the surface itself. a lot of people/companies call it 'surface finish'. handleman, finish specification lay lines are described in the ever popular machinery's handbook. jhg thanks. i suppose then i am trying to control lay lines using standard symbols. at what point would the circular lay lines of a face mill become perpendicular as there does not seem to be a symbol for this lay. when i can accept 3 lay line styles, would i put all 3 in the finish symbol check mark (perpendicular, circular and longitudinal) steve add the roughness symbol/info to the drawing, let the machine shop do the rest. they will have to meet the spec. chris solidworks/pdmworks 08 3.1 autocad 08 __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]