几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

bend radius on 1/4" flatbar
can anyone tell me the bend radius on 1/4" flatbar when bent at a 90 degree angle?
thanks
check out our whitepaper library.
the bend radius can be anything that your design needs. minimum inside bend radius would be material thickness.
"wildfires are dangerous, hard to control, and economically catastrophic."
"fixed in the next release" should replace "product first" as the ptc slogan.
ben loosli
cad/cam system analyst
ingersoll-rand
in general, yes. but... minimum bend radius can be less than the material thickness. it depends on the material being bent, process and other factors.
this isn't really a drafting or gd&t question however.
i think there is a world market for maybe five computers.
thomas watson, chairman of ibm, 1943.

2009-09-04, 05:01 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	bend radius on 14 flatbar bend radius on 1/4" flatbar can anyone tell me the bend radius on 1/4" flatbar when bent at a 90 degree angle? thanks check out our whitepaper library. the bend radius can be anything that your design needs. minimum inside bend radius would be material thickness. "wildfires are dangerous, hard to control, and economically catastrophic." "fixed in the next release" should replace "product first" as the ptc slogan. ben loosli cad/cam system analyst ingersoll-rand in general, yes. but... minimum bend radius can be less than the material thickness. it depends on the material being bent, process and other factors. this isn't really a drafting or gd&t question however. i think there is a world market for maybe five computers. thomas watson, chairman of ibm, 1943. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]