查看单个帖子
旧 2009-05-06, 08:34 PM   #1
yang686526
高级会员
 
注册日期: 06-11
帖子: 14579
精华: 1
现金: 224494 标准币
资产: 234494 标准币
yang686526 向着好的方向发展
默认 【转帖】odgecylinder.getheight90 method

odgecylinder.getheight() method
odgecylinder.getheight() method
why the height method of odgecone and odgecylinder is written so. i am not getting it. simply speaking, height of a cylinder is a floating point number. why it is written as an function which takes values between 0 and 1.
i am not getting the point(logic). kindly reply this thread.
with regards
anirban talukdar
odgecylinder can represent both bounded and unbounded cylinder (or bounded at one side). so the height is represented by odgeinterval.
sergey slezkin
height of infinite cylinder
so what will be the height of a infinite cylinder for its two ends i.e for u=0 and u=1. what the two numeric value will be for the method
heightat(0) and heightat(1) for an infinite cylinder.
with regards
anirban talukdar
i got the solution
thanks for guiding me
i got the solution of the query, it is actually maintained by odgeinterval object.
there is another query. what is me meaning/use of tolerance of odgeinterval.
with regards
anirban talukdar
tolerance is used in odgeinterval for comparing bounds of interval to determine if they are joint, one contains another etc.
sergey slezkin
tolerance of odgeinterval
i am not getting you sir. kindly write me something explicitly.
with regards
anirban
interval_1 : [-1, 0]
interval_2 : [1.e-10, 2]
these intervals are disjoined with tolearance 1.e-12
and joined with tolerance 1.e-6
sergey slezkin
yang686526离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)