几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   SolidWorks二次开发 (http://www.dimcax.com/hust/forumdisplay.php?f=111)
-   -   Do you have a better way to get the wireframe model? (http://www.dimcax.com/hust/showthread.php?t=745)

yogy 2007-05-21 09:21 AM
Do you have a better way to get the wireframe model?
 
Q:
Subject: Do you have a better way to get the wireframe model? SR:1-448496991

Earl,

I only want to get the wireframe model. It seems to convert slowly when I used your mentioned method (face->loop>edge).

Do you have a better way?
Yogy

yogy 2007-05-21 09:22 AM
回复: Do you have a better way to get the wireframe model?
 
R:
If you are looking for the wireframe of the model, you could use Body2.GetEdges. This will give you all of the edges directly. From there you would be able to display the model.





Regards,

-Earl


所有的时间均为北京时间。 现在的时间是 02:31 AM.