几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - How to set tessellation quality for a face?

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)

- SolidWorks二次开发 (http://www.dimcax.com/hust/forumdisplay.php?f=111)

- - How to set tessellation quality for a face? (http://www.dimcax.com/hust/showthread.php?t=738)

yogy	2007-05-20 09:54 AM

How to set tessellation quality for a face?

Q:
Dear,

You mentioned that call ModelDoc2.SetTessationQuality to adjust or set the tessellation quality of modelDoc. It is possible that Faces are different in the tessellation quality.

I need set different tessellation quality to Faces now.

How to set tessellation quality for a face?
Yogy

yogy	2007-05-20 09:54 AM

回复: How to set tessellation quality for a face?

R:
I can’t find a way to adjust the tessellation for individual faces. This is most likely a limitation in SW.

Robin Richter

所有的时间均为北京时间。现在的时间是 10:32 PM.