几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   SolidWorks二次开发 (http://www.dimcax.com/hust/forumdisplay.php?f=111)
-   -   【转帖】inserting a bom with show numbering selected (http://www.dimcax.com/hust/showthread.php?t=5456)

yang686526 2009-04-13 12:18 PM

【转帖】inserting a bom with show numbering selected
 
inserting a bom with "show numbering" selected
hi everyone,
i've written a macro that at one point inserts a bom using "insertbomtable2". i have the "bomtype" set to "swbomtype_indented" but would also like "show numbering" selected. i can't seem to find where in "insertbomtable2" i can set this option, or where i can change it after the bom is created. if anyone knows how to change this, i'd appreciate the help.
~craig
i'm almost sure this was asked a while back and we all concluded that we could not find any option or way to do this through api, i remember looking into it myself.
i have just been having another look and had a right deja vu perhaps you should email api support for a definative answer


所有的时间均为北京时间。 现在的时间是 08:00 PM.