几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   ilt wall parapets (http://www.dimcax.com/hust/showthread.php?t=29605)

huangyhg 2009-09-16 02:21 PM

ilt wall parapets
 
tilt wall parapets
does anyone have any guidelines on high of a parapet you can have with a 7 1/4" and 9 1/4" tilt wall? also what would the deflection criteria be?
find a job or post a job opening
as high as you want as long as the panel can take it.
i would limit deflection to cantilever/150 (dont forget to include the effect of the backspan).
also this has a multiplying effect on the lateral forces at roof level, make sure that this is accounted for in the design of your steel supports and the lateral bracing.


所有的时间均为北京时间。 现在的时间是 10:18 PM.