几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   simplified wind, c c (http://www.dimcax.com/hust/showthread.php?t=28793)

huangyhg 2009-09-15 10:49 PM

simplified wind, c c
 
simplified wind, c & c
how do you address the issue of wind uplift at a roof overhang using this method? simplified mwfrs has roof overhang uplift loads but not c&c.
simplified method does have overhangs check the last part of figure 6-3 in acse 7-05. the table has overhang net pressures.


所有的时间均为北京时间。 现在的时间是 05:25 PM.