几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)

- 产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)

- - shear capacity adjustment factors (http://www.dimcax.com/hust/showthread.php?t=28582)

huangyhg

2009-09-15 09:31 PM

shear capacity adjustment factors

shear capacity adjustment factors
through interpolation, can ibc table 2305.3.7.2 be used for wall heights other than the 8 and 10 foot heights listed?
thank you ...
yes.
daveatkins

所有的时间均为北京时间。现在的时间是 03:06 PM.