【转帖】hel 4.3 bestfit - c-dmis user forum.txt
 

hel 4.3 bestfit
hel i went form 4.2 to 4.3 and i can not get 4.3 to bestfit
">
take a hold of the cad a drag it to the center. save it and it will come back the next time in the center. i have also noticed that sometimes i have needed to save the rogram after loading in the cad, close the rogram then reoen it while using 4.3 for the cad to work right.
__________________
thanks (cad is always master)
niven