几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   pe exam study materials (http://www.dimcax.com/hust/showthread.php?t=27146)

huangyhg 2009-09-15 11:49 AM

pe exam study materials
 
pe exam study materials?
i'm taking the april se1 exam and was wondering if anyone had bought subasic's, "six-minute solutions for structural i pe exam problems" and ncees', "ncees structural i engineering sample questions and solutions" books and whether they were worth their price.
if i re
i bought the book by subasic. it's really good, imho.
i bought ms. subasic's book, too. it's a good kick start concerning the codes. i did all the problems and brought the book with me to the exam (it's allowed - the procters checked). it's thinner than you'd think it should be but worth the extra $40 or so.
thanks folks, i went ahead and ordered both. i hope my salary increase after getting my pe will cover the loads of books i had to buy!
for help on se exam help, check out.............
tmacattack,
have you enough time to study for the seii? i am assuming you have... what state? and what was the appliction process like? i'd check it out myself, but that's too easy...
dave,
i actually took the sei and seii last fall. i failed the seii. i was pretty exhausted after two 8 hour exams in consecutive days. i studied many hours in preparation, about 1 year in advance. i am getting ready to study once again for the spring exam. hopefully, i will pass it and not have to give up my social life for studying anymore.
i live and work in illinois. for structural work in illinois, a pe is pretty much worthless. you need to get a se license which requires passing the sei and seii exams. the application is similar to the pe applications, but you must show that you've worked under a pe or se doing structural work for 4 years.


所有的时间均为北京时间。 现在的时间是 01:09 PM.