几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   nyc 2008 building code (http://www.dimcax.com/hust/showthread.php?t=26857)

huangyhg 2009-09-10 04:49 PM

nyc 2008 building code
 
nyc 2008 building code
i have the following questions on 2008 nyc building code
section 1609.6.3.3 components and cladding:

1- could this section be used to design parapet walls (wind load = 30 psf) ?

2- if yes, is there any building height requirements. (other then section 1609.6.1 scope)


所有的时间均为北京时间。 现在的时间是 09:54 PM.