几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   most common sections in europe (http://www.dimcax.com/hust/showthread.php?t=26676)

huangyhg 2009-09-10 03:17 PM

most common sections in europe
 
most common sections in europe?
what section is most common in europe? the ipe or the he or some other section?
in the u.s. , w sections are very common. an "h" or "s" on the other hand is not easy to find.
i need to specify either ipe or he, and don't want the contractor to have the more common section.
ipe and hea or heb together with upn are common and easily found in almost all sizes. however their usage is different, and you might need a mix of the three types in the same structure (though it all depends on the type of structure of course).
prex
"and don't want the contractor to have the more common section." what does this mean? doesn't sound good.
i do want to facilitate the contractor by specifying the easiest section to find.
i edited that sentence, and the meaning was disastrously altered. thanks for the mention.


所有的时间均为北京时间。 现在的时间是 07:02 AM.