几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   macomber joists attn mattman (http://www.dimcax.com/hust/showthread.php?t=26160)

huangyhg 2009-09-10 12:08 PM

macomber joists attn mattman
 
macomber joists attn: "mattman"
i need load tables for macomber joists asap. i saw mattman had some info on an earlier posting. specifically i am looking for info on joists called out as a j-1 516p or a j-2 416p. any help would be greatly appreciated. fax (310) 791-7308.

mattman - sounds like you ought to publish these valuable charts - you could make a million!
bhop- i'll fax you what i have in the morning.
i don't have the catalog in front of me; i don't know offhand if the joists you are looking for are in there. good luck!
jae- you're right! maybe i should start a consulting firm exclusively dedicated to providing the macomber catalog to desperate engineers at an exorbitant cost!
maybe call it pirate engineers? arrgh, maties!
mattman, i appreciate the help. after extensive internet searching you are the only person i have been able to find with the goods.
well, i seem to re
mattman -
you seem to be the only one, possibly in the nation, who has information on macomber floor joists. i also am another structural engineer in need of this information. if you would be so obliged, could you fax some information asap on joists designated 24f35 to (401) 724-1981. also, our office is looking to get a copy of one of the macomber catalogs. if you could tell me of any place/person from which we could obtain one, that would be fantastic.
thanks,
bull96


所有的时间均为北京时间。 现在的时间是 06:25 AM.