几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   looking for an article (http://www.dimcax.com/hust/showthread.php?t=26076)

huangyhg 2009-09-10 11:39 AM

looking for an article
 
looking for an article
i am looking for an article i saw many years ago. it was about a one story industrial building built with steel beam purlins sitting on top of rolled beam girders over the top of columns. there were no stiffeners or braces and the building collapsed from instability.
i think this might have been in an older textbook, perhaps from the 50's, 60's or 70's. does anyone remember seeing this or know what book it may have been in?

hi, jike,
i looked in my files and could not find an article i read about a supermarket roof collapse. as i recall, the issue was beam over column (with open web joists) construction was used, with no stiffener plates above the columns. a hinge formed at the top of the column, and the buckling force in the top of the column/bottom flange of the beam caused a failure.
ever since i read that article, i always use stiffener plates over columns in this type of construction.
daveatkins


所有的时间均为北京时间。 现在的时间是 06:08 AM.