几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   how to calculate tension on threaded rod (http://www.dimcax.com/hust/showthread.php?t=25328)

huangyhg 2009-09-09 05:39 PM

how to calculate tension on threaded rod
 
how to calculate tension on threaded rod
pls help me how to calc tension on threaded rod on following condition.
hospital project (oshpd), seismic zone = 4 (0.45g), weight of trapeze (w/conduits) = 100 lb/lf, supported at every 8ft, one transverse brace at every 16ft and one tranverse + two longitudinal braces at 32ft.
width of trapeze is 3ft and length of rods are 5ft.
how to calc the tension on the vertical support (rod) at seismic restraint location?
thanks.


所有的时间均为北京时间。 现在的时间是 05:53 AM.