几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   PC-DMIS (http://www.dimcax.com/hust/forumdisplay.php?f=52)
-   -   Bonus Refinement (http://www.dimcax.com/hust/showthread.php?t=2309)

huangyhg 2008-12-30 08:31 PM

Bonus Refinement
 
I've modified these topics by adding in a "Bonus Refinement" subtopic with the info suggested:

In GD&T FCF section: http://10.57.112.13/WAIhelp/Core/fe...ning_Datums.htm

In Legacy Dimension section:
http://10.57.112.13/WAIhelp/Core/19...sing_Datums.htm

Let me know if anything else is needed.


所有的时间均为北京时间。 现在的时间是 11:13 PM.