几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   blocking soffits (http://www.dimcax.com/hust/showthread.php?t=22050)

huangyhg 2009-09-07 03:58 PM

blocking soffits
 
blocking & soffits
i just realized that my continuous perimeter roof diaphragm blocking will render the architect's ridge/soffit vent system useless. duh.
any suggestions?
-jack
blocking with holes or block every other space.
had them cut 6" diameter holes in the center of the 2x10 blocking.
thanks.
-jack


所有的时间均为北京时间。 现在的时间是 11:41 PM.