几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   asce 7-05, figure 6-21 (http://www.dimcax.com/hust/showthread.php?t=21607)

huangyhg 2009-09-07 01:16 PM

asce 7-05, figure 6-21
 
asce 7-05, figure 6-21
what if you have an h/d greater than 25? it doesn't seem like you can assume that the values for 25 are for infinity.
check out our whitepaper library.
i would in fact assume that the h/d values are good for infinity; that is, the end effects are no longer significant.


所有的时间均为北京时间。 现在的时间是 11:37 PM.