几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   产品功能分析 (http://www.dimcax.com/hust/forumdisplay.php?f=10)
-   -   anchor rod material (http://www.dimcax.com/hust/showthread.php?t=21388)

huangyhg 2009-09-07 11:58 AM

anchor rod material
 
anchor rod material
i'm looking at the 3rd ed. lrfd at the preferred material specification for anchor rods (pg. 2-26), and i see f1554 gr. 36. quiet frankly, i havent heard of that spec. i've been calling out a36 anchor rods. what has everyone else been doing, and is f1554 common in all fabricatiors shops now?

f1554 is a relatively new material spec. check out this article from modern steel construction, march, 1999:
good job, mattman!
excellent info, mattman. change the last url reference to contentid=2587 instead of 2585 to get all three of the series. (shapes, plates, bolts)
so have you guys been calling out a36 rods or f1554? i usually have a note that says all miscellaneous steel to be a36, but i guess that should change, no?
we've normally specified a36. the f1554 is new to me.


所有的时间均为北京时间。 现在的时间是 03:12 PM.