symbolindication for where to apply solder
 

symbol/indication for where to apply solder
is there an industry standard/accepted symbol (like a welding symbol) or something to indicate on a drawing places to apply standard tin/lead solder on thru hole components? just working on some assembly drawings and wanted to indicate all points where solder must be applied..
thanks
check out our whitepaper library.
i was reading the notes on welding in global drm and it briefly mentioned soldering.
i believe it is covered by the aws standards, probably 2.4.
i saw that table of contents but don't have access to any of those welding standards as we don't do/spec any welding at my facility.
i figured though that it really wasn't talking about the same type of "soldering" as electrical component thru hole soldering so i figured it wouldn't apply.
any other ideas? i might just pick a symbol and add that to our own internal rules/standards.
you might also look in the ipc standards to see what you can find.
yes i have already emailed ipc to see if they have a standard that might reference that (no response yet).. thanks
promoting, selling, recruiting and student posting
are not allowed in the forums.
(add stickiness to your site by linking to this professionally managed technical forum)
title: drafting standards,
description: drafting standards, gd&t & tolerance analysis technical support forum and mutual help system for engineering professionals. selling and recruiting forbidden.