几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量

几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 (http://www.dimcax.com/hust/index.php)
-   American standards (http://www.dimcax.com/hust/forumdisplay.php?f=81)
-   -   【转帖】electrical schematics (http://www.dimcax.com/hust/showthread.php?t=14395)

yang686526 2009-04-29 07:51 PM

【转帖】electrical schematics
 
electrical schematics
all my experience is in machine design but once in a while i have to make an electrical schematic. these are complex conrol systems with lots of sensors and actuators. i make the schematic on one sheet and the harness details on another. so far i have just made up my own system and placed the components according to what looks good on paper.
is there an industry standard that should be followed? for example, the right way to show junctions or wires crossing, or how much detail to show for connectors, how to label wires, what colors and stripes should be used.
asme:
y14.5
y14.15
y32.2
national electrical code book
to name a few. there are more.
chris
sr. mechanical designer, cad
solidworks 05 sp3.1 / pdmworks 05
in the usa you should be using nfpa 79 "electrical standard for industrial machinery".
david baird


所有的时间均为北京时间。 现在的时间是 11:13 PM.